Bajaj Auto Pulsar 150 Owner's Manual page 19

How to Ride Your Bike
Shifting Gears :
• Close throttle & depress the clutch.
• Shift into next higher or lower gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
Gear Shifting Lever
Recommended Speed for Shifting Down
From 5 to 4 Gear th th
From 4 to 3 Gear th rd
rd nd
From 3 to 2 Gear
nd st
From 2 to 1 Gear
Gear Shifting
Pattern
45 km/h
35 km/h
25 km/h
15 km/h
Warning : When shifting down to lower
gear, do not shift at such high speed that
engine rpm jumps excessively. This may
cause engine damage, & rear wheel may
skid. Downshifting should be done at
recommended speeds as shown in table.
Braking :
• Close throttle completely, leaving clutch
engaged (except where shifting gears) so
that engine braking will help slow down
motorcycle.
• Shift down one gear at a time so that you
are in Neutral when you come to a complete
stop.
• Front brake is to be used to get maximum
braking performance.
• Rear brake is to be used when more de
celeration is required.
• When stopping, always apply both brakes at
the same time. De-clutch as necessary to
avoid engine stalling.
16