Removal & Fitment Of Side Covers - Bajaj Auto Pulsar 150 Owner's Manual

Removal & Fitment of Side Cover LH / RH
Fig. Side Cover LH
Removal of Side Cover LH
• Insert key into the cover lock & turn
clockwise and pull the 'Side Cover' out
from the bottom.
• Pull front portion of 'Side Cover' to release
its Lug from hole (A) of 'Fuel Tank'.
• Slide the 'Side Cover' forward (towards the
engine) to release slot provided on its rear
end from 'bracket with rubber cap' (B)
provided on 'Chassis'.
• Take out side cover.
B
A
Removal of Side Cover RH
• Remove the screw (C) securing the 'Side
Cover RH'.
• Pull front portion of 'Side Cover' to release
its Lug from hole (A) of 'Fuel Tank'.
• Slide the 'Side Cover' forward to release
slot provided on rear end of 'Side Cover'
from 'bracket' (B) provided on 'Chassis'.
• Take out side cover.
CAUTION : Remove cover as described
above, Otherwise the lugs may break.
10
C
Fig. Side Cover RH