Table of Contents
Advertisement
How to Ride Your Bike
Starting The Engine :
• Turn the fuel tap knob to 'ON' or 'RES'
position.
• Switch 'ON' ignition & 'Kill Switch'
• Confirm that transmission is in neutral.
• Keep throttle completely closed, press starter
button "
" to start the engine.
• Release starter button as soon as engine
starts.
Note : Do not let the engine idle longer than 3
minuets otherwise it will overheat.
• If the engine is cold or when starting for first
time, use choke '
OFF
ON
'for quick starting.
•
When the engine is
warmed up enough to
idle without using
choke, return the
choke to OFF
position.
Manual Choke
Caution : Do not operate the starter
continuously for more than 5 seconds
otherwise battery would get discharged.
Wait 15 sec. between each operation of
the starter which will facilitate battery to
recover.
Note : The motorcycle is equipped with a clutch
switch. This switch ensures that engine does not
start if the transmission
However, the engine can be started in any
gear if the clutch lever is pressed.
Moving Off :
•
Check that Center/Side stand is up.
•
Depress the clutch lever.
•
Shift into 1 gear.
st
•
Open the throttle and release the clutch
lever slowly and simultaneously.
•
As the clutch starts to engage, open the
throttle a little more, giving the engine just
enough rpm to keep it from stalling.
15
is in gear.
Advertisement
Table of Contents
