Bajaj Auto Pulsar 150 Owner's Manual page 20

Table of Contents

Advertisement

How to Ride Your Bike
Stopping the Vehicle :
• Close the throttle completely.
• Shift the transmission into neutral.
• Bring the vehicle to complete stop.
• Turn the ignition switch off.
Parking the Vehicle :
• Support the motorcycle on a firm level
surface with the center or side stand.
• Lock the steering.
CAUTION : Do not park on a soft or steeply
inclined surface or the motorcycle may fall over.
Whenever vehicle is falls down, remove plug of 'Y
connecter drain tube' & drain out accumulated
petrol
Location - Near Main Stand
'Y connecter drain
tube plug'
Running IN
Proper running-in is important for the better
life & trouble free performance of the vehicle.
• During first 2000 kms running-in period do
not exceed following speed limits.
Kms
1st
0 - 1000
1000 - 2000
• Always keep the speed below the limits
mentioned in the table.
• Do not race the engine excessively.
• Do not start moving or race the engine
immediately after starting. Run the engine
for a minute at idle speed to give the oil a
chance to workup into the engine.
17
2nd
3rd
4th
10
20
30
35
15
30
40
45
5th
45
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pulsar 180

Table of Contents