Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser SK 300 G3 Manual

ew G3 SK 300_529670_0109_SP8_PRT.book Seite 17 Donnerstag, 5. Februar 2009 10:26 10

Adjusting settings via the operating menu

Adjusting settings via the operating menu
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the body-
pack transmitter. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SK 300 G3 product page at www.sennheiser.com.

The main menu "Menu"

Adjusting the input sensitivity – "Sensitivity"
SET
Menu S e n s i t i v i t y
S e n s i t i v i t y – 12
–12 dB
Call up Select the desired
"Sensitivity" setting
"Stored"
Adjustment range: 0 to 60 dB, adjustable in steps of 3 dB
The transmitter's audio level display "AF"
level, even if the bodypack transmitter is muted, e.g. allowing you to check
the adjusted sensitivity before live operation.
B.Ch: 20.12
543.200 MHz
P
MUTE
AF
Input sensitivity
adjusted... Effect/display
... too high Close talking distances, speakers with loud voices
or loud music passages cause overmodulation in
the transmission link. The yellow
lights up. The audio level display "AF"
full deflection for the duration of the over-
modulation.
... correctly The audio level display "AF"
deflection only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
The following figures are a guide to the best settings:
Transmission situation
Loud music/vocals
Presentations
Selecting the frequency bank and the channel manually –
"Frequency Preset"
SET
Frequency Preset
Menu
Frequency Preset B.Ch:
B.Ch: 5.14
Call up "Frequency Select the
Preset"
frequency bank
and confirm
"Stored"
When you are in the "Frequency
deactivated.
S e n s i t i v i t y
dB –36 dB
Store the setting
SET
always indicates the audio
²
²
AF PEAK LED
shows
shows full
Sensitivity setting
30 to 21 dB
21 to 0 dB
SET
Frequency Preset
5.14 B.Ch: 1.14
MHz MHz
Select the channel;
store the setting
SET
Preset" menu item, the RF signal is
17