Attaching The Bodypack Transmitter To Clothing - Sennheiser SK 300 G3 Manual

ew G3 SK 300_529670_0109_SP8_PRT.book Seite 10 Donnerstag, 5. Februar 2009 10:26 10
Putting the bodypack transmitter into operation

Attaching the bodypack transmitter to clothing

You can use the belt clip to attach the bodypack transmitter to clothing
(e.g. belt, waistband).
The belt clip is detachable so that you can also attach the transmitter with
the antenna pointing downwards. To do so, withdraw the belt clip
its fixing points and attach it the other way round.
The belt clip is secured so that it cannot slide out of its fixing points
accidentally.
To detach the belt clip:
Lift one side of the belt clip as shown.
Press down the belt clip at one fixing point and pull it out of the trans-
mitter housing.
Repeat for the other side.
10
from