Overview Of Menus Evolution Wireless G2, Generation 2; Working With The Operating Menu; Getting Into The Operating Menu; Selecting A Menu - Sennheiser Tourguide UHF EK 1035 UHF Instructions For Use Manual

Overview of menus
evolution wireless G2, generation 2
Display Function of the menu
BANK Switching between channel banks
CHAN Switching between the channels in a channel
bank
TUNE Setting a transmission frequency for the
channel bank "
SENSIT Adjusting the sensitivity (AF)
DISPLY Selecting the standard display
PHANTO Switching the phantom powering on/off
NAME Entering a name
RESET Loading the factory-preset default settings
PILOT Activating/deactivating the pilot tone
transmission
LOCK Activating/deactivating the lock mode

Working with the operating menu

By way of example of the "TUNE" menu, this section describes how
to use the operating menu.
After switching the transmitter on, the standard display is shown
on the display panel.

Getting into the operating menu

Press the SET button to get from the standard display into the
operating menu. The last selected menu flashes on the display.

Selecting a menu

Press the / buttons to select a menu.
Press the SET button to get into the setting mode of the selected
menu. The current setting that can be adjusted flashes on the
display.
(user bank)
U"
45