Operating The L 6000 Via A Network - Sennheiser Digital 6000 Instruction Manual

Operating the L 6000 via a network

You can use the Sennheiser Wireless Systems Manager software to oper-
ate the charger via a network connection.
To do so, connect the L 6000 charger to a network (see "Connecting
▷
the L 6000 to a network") and establish the connection with the WSM
software.
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruction
manual for the software. You can download the software at
www.sennheiser.com/download.
You can perform the following actions using WSM:
• Updating the L 6000 charger firmware
• Preparing rechargeable batteries for storage (see "Preparing recharge-
able batteries for storage (storage mode)").
Using the L 6000
141