Table of Contents
Advertisement
3
MbN: Select "External" to monitor
from an outside line. a MEditN a
MAddN
4
MbN: "Phonebook" a MSelectN
5
MbN: Select the phonebook entry. a
MSelectN
6
MbN: Select the desired phone number.
a MSaveN
R "Baby monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
MMenuN (right soft key) #268
2
MbN: "On" a MSelectN
3
MbN: Select "External" to monitor
from an outside line. a MEditN a
MAddN
4
MbN: "Manual" a MSelectN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN
a MSelectN
R "Baby monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press MMenuN on the handset being
monitored.
2
MbN: "On/Off" a MSelectN
3
MbN: "Off" a MSelectN a MOFFN
Editing an outside monitoring number
1
Press MMenuN on the handset being
monitored.
2
MbN: "On/Off" a MSelectN
3
MbN: "On" a MSelectN
4
MbN: Select the outside line. a MEditN
PRS120C(en)_0121_ver110.pdf
5
6
7
Erasing an outside monitoring
number
1
2
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
1
2
3
Answering the baby monitor
n When monitoring with a handset:
29
Programming
MMenuN a MbN: "Edit" a MSelectN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN a MSelectN
Press MMenuN on the handset being
monitored.
MbN: "On/Off" a MSelectN
MbN: "On" a MSelectN
MbN: Select the outside line. a MEditN
MMenuN a MbN: "Erase" a MSelectN
MbN: "Yes" a MSelectN a MOFFN
monitoring call.
Press MMenuN on the handset being
monitored.
MbN: "Sensitivity level" a
MSelectN
MbN: Select the desired setting. a
MSaveN a MOFFN
Press M
N to answer calls.
If you want to respond from the monitoring
handset, press MMuteN.
R The monitoring handset will answer calls
automatically when the auto intercom
feature is set to "On" (page 15).
Note:
R If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press MOFFN, then press M
N.
29
2014/01/29
14:56:58
Advertisement
Table of Contents
