Table of Contents
Advertisement
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
Using the Rollover Protection
System (ROPS)
Warning
To avoid injury or death from a rollover, keep the
roll bar in the raised locked position and use the
seat belt.
Ensure that the rear part of the seat is secured
with the seat latch.
Warning
There is no rollover protection when the roll bar is
in the down position.
Lower the roll bar only when absolutely
necessary.
Do not wear the seat belt when the roll bar is in
the down position.
Drive slowly and carefully.
Raise the roll bar as soon as clearance permits.
Check carefully for overhead clearances (e.g.,
branches, doorways, and electrical wires) before
driving under any objects and do not contact
them.
Important
Lower the roll bar only when absolutely
necessary.
1. To lower the roll bar, loosen the front handles (Fig. 2).
1
1. Front handle
2. Remove the hairpin cotter pins and remove the 2 pins
(Fig. 3).
1
3
4
1. Roll bar
2. Raised position
15
m-7406
Figure 2
2
m-7431
Figure 3
3. Pin
4. Hairpin cotter pin
Advertisement
Table of Contents
