Controls - Toro 74411 Operator's Manual

Caution
This machine produces sound levels in excess of
85 dBA at the operators ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
Figure 6
1. Warning—wear hearing protection.

Controls

Become familiar with all the controls (Fig. 7) before you
start the engine and operate the machine.
8
7
Figure 7
1. Ignition switch
2. Motion control lever
3. Parking brake lever
4. Throttle
5. Choke
2
9
5
1
4
3
6
m–7701
6. Power takeoff (PTO)
7. Height-of-cut lever
8. Fuel cap
9. Hourmeter
Using the Hour Meter
The hour meter (Fig. 8) records the number of hours the
engine has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance.
1. Hour meter
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side and the
other on the right side. Each tank connects to a check valve
and then to a tee. From there a common fuel line leads to
the engine (Fig. 9).
1
1. Fuel shutoff valve
Close the fuel shutoff valve before transporting or storing
the machine.
17
1
m–4202
Figure 8
m–7702
Figure 9