Dial Mode; Restore Default Settings - BT MANGO User Manual

Dial mode

1. Press or until
select the OK option.
2. Press or until
the OK option.
3. Press or to highlight the dial mode you want.
4. Select the OK option. You will hear a confirmation tone.
5. Press and hold

Restore default settings

You can restore your BT Mango to its default (original)
settings. Please note this will delete your phonebook,
redial and calls list.
1. Press or until
OK
select the option.
2. Press or until
then select the OK
3. PIN Code? is displayed. Enter your 4 digit PIN code and
select the OK option. After a few seconds the handset
power switches off and the base beeps. The handset will
then switch itself back on and show the standby display.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
Base Settings
is displayed then
Dial mode
is displayed then select
to exit and return to standby.
Base Settings
is displayed then
Restore settings
option.
Your BT Mango is pre-set to Tone
dialling. The dial mode options are
Tone (Time Break/Earth) or Pulse
(Earth).
is displayed
Base settings 35