Table of Contents
Advertisement
3. The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Profile
option.
T o exit the User Profile options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode
screen.
4. The Console display shows the NAME prompt and the current User Profile name.
Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 13 characters.
The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank
space (found between A and Z). To set each segment, use the Left() or Right() buttons to shift between segments.
Push the OK button to accept the displayed User name.
5. T o edit the other User data (WEIGHT, HEIGHT, AGE, GENDER), use the Increase/Decrease buttons to adjust, and
push OK to set each entry.
Note: The User BMI is displayed on the HEIGHT prompt in the TIME display field.
The BMI Measurement is a useful tool that shows the relationship between weight and height that is associated with body
fat and health risk. The table below gives a general rating for the BMI score:
Note: The rating may overestimate body fat in athletes and others who have a muscular build. It may also underesti-
mate body fat in older persons and others who have lost muscle mass.
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate for you.
Use the values calculated or measured by the machine's computer for reference purposes only.
6. The Console display shows the LAP DISTANCE prompt. This option controls the length of distance for a LAP during a
workout. Use the Increase/Decrease buttons to adjust the LAP distance value. The default is "0.25" miles (or 0.4 km).
Push the OK button to set the LAP distance value.
7.
The Console display shows the SCAN prompt. This option controls how the workout values are displayed during a
workout. The "ON" setting allows the Console to automatically display, or scan, between the workout values every 4
seconds. The "OFF" setting allows the user to push the RIGHT or LEFT buttons to view the other workout values when
desired.
The default is "ON".
Push the OK button to set how the workout values are displayed.
8. T he Console shows the workout display VALUE prompt. This option controls if a workout value is displayed during a
workout. The "ON" setting allows the Console to display the workout value, an "OFF" setting disables the workout value
during a workout.
The Console flashes the active workout value ( either Time, Lap (Time), Distance, Lap (Count), Heart Rate, Calories, or
Pace ) and states the current setting: "VALUE - ON" or "VALUE - OFF". Push the Increase() or Decrease() buttons
to change the current setting, and push the Left() or Right() buttons to shift the active workout value.
Note: The Incline and Speed workout values cannot be disabled.
The default is "VALUE - ON" for all workout values. When done with modifying which workout values are displayed,
push the OK button to set the Console.
9. The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings
and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option
allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.
34
Underweight
Below 18.5
Normal
18.5 – 24.9
Overweight
25.0 – 29.9
Obesity
30.0 and above
Advertisement
Table of Contents
