Table of Contents
Advertisement
To set the Caller Identification options
at each extension
Press keypad buttons in order shown
You must select the level of Caller
Display functions you receive at each
extension.
Lift the handset at the extension you
wish.
8
Enter this code.
1
Switches Caller Display
announcements off.
Or
2
For announcements that indicate
withheld or unavailable numbers.
Or
3
For announcements that give a name
linked to a number stored in the speed
dial directory, as well as any withheld
or unavailable numbers.
Or
4
For Caller Identification announcements
on all incoming calls. If no name is
linked to the number, the number will be
announced in full, including the national
and international dialling codes.
To confirm.
32
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
To review calling numbers
#
Enter this digit. The Ultimate 106 will
announce the last calling number.
Enter this digit. The Ultimate 106 will
3
announce chronologically later
numbers.
or
Or
1
Enter this digit. The Ultimate 106 will
announce chronologically earlier
numbers.
To screen incoming calls using
Caller Identification
When you pick up the handset the
number is announced to you.
To take the call, press Recall or wait.
To ignore a call, hang up. All phones
will start to ring again. If Call Director
or answer machine in ON, they will
pick up after the programmed number
of rings.
Advertisement
Table of Contents
