BT Ultimate 106 User Manual page 10

First remove the cable clamp. Connect the 2
exposed wires into the first set of twin screw
connectors in your Ultimate 106 and tighten the
screws to secure the wire, in place.
Ext 11 Ext 12 Ext 13 Ext 14 Ext 15 Ext 16
ephone
EXT 11 EXT 12 EXT 13 EXT 14 EXT 15 EXT 16
Line
Cable
clamp
Replace the cable clamp when finished.
PLEASE NOTE
If you are planning to site 2 extension sockets
side by side, you can use the blue wires for one
socket and the orange wires for the second socket.
Connect the telephone line cord
3
If you do not have modern phone sockets, call
Freefone 0800 800 150 and ask for a BT
engineer to come and fit the correct type. This
is a chargeable service.
8
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
External
Power
In Use
Day/Night
Messages
DISA/Ans
EXT 11 EXT 12 EXT 13 EXT 14 EXT 15 EXT 16
Ultimate 106
1X6 PABX WITH VOICE MAIL & CALLER ID
4 Connect the power cable
Connect the 3-pin plug into the mains socket and
switch the power on. The POWER light comes on.
Your Ultimate 106 is now installed
Power
In Use
Day/Night
Messages
DISA/Ans
Ultimate 106
1X6 PABX WITH VOICE MAIL & CALLER ID