Table of Contents
Advertisement
To use the BT Ringback ser vice
With the BT Ringback service, when an
engaged telephone becomes free again,
you are called back.
This is a BT Network Service and is
chargeable. Please contact BT for more
details.
When you hear the engaged signal:
5
Press
.
5
Replace the receiver. When the network
rings back, all extensions will ring.
When you lift the handset, the call is
connected.
PLEASE NOTE
If you have set Answer Machine, the Ringback
will continue to ring all extensions. It will not
be answered by the Answer Machine.
To cancel a BT network Ringback
9
Enter this code from any extension.
#37#
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
Up to 50 names and numbers may be stored in
the system.
Using the speed dial memory
To store a name and number
Enter this code.
6
The voice announces
Speak the name to go with the number
into the handset.
After 3 seconds the voice announces
"Enter 2 digit location and number"
(to shorten the length of the recorded
name, press
RECALL
RECALL
01-50
Enter the 2-digit memory location under
which you want to store the number.
(Select from
01
Enter the telephone number you want.
KEYPAD
(It is not necessary to insert
outside line when storing Speed Dial
numbers.)
Hang up your extension.
A maximum of 30 digits can be stored.
If 30 digits are entered, you will hear a
beep and the number is stored. Hang
up to finish.
Location 50 is reserved for a hotline
extension number.
Location 49 is reserved for the door
"Ring a telephone number"
intercom
mode. This will enable visitors to be
directed to another number (stored in
location 49) when pressing the door
intercom button.
"Record name"
.
while recording).
to
).
50
for an
9
29
Advertisement
Table of Contents
