BT Ultimate 106 User Manual page 30

Connect up to 6 extensions on a single line, with voice mail and caller identification features
Hide thumbs Also See for Ultimate 106:
Table of Contents

Advertisement

Using your Ultimate 106 as
a Room Monitor
You can use extensions on your Ultimate 106 to
monitor sounds.
To set the Room Monitor
Press keypad buttons in order shown
To hear the sounds close to an
extension:
Lift the receiver.
Enter this code on the extension phone
80#
and leave the receiver off hook.
When that extension is dialled from
any other extension, you can hear the
sounds at the off-hook extension instead
of an engaged tone.
By using speakerphones as extensions,
it is possible for 2-way communication
between the extension on Room Monitor and
28
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
another extension.
Using Ringback
You can set your Ultimate 106 to tell you when
engaged extensions or telephone numbers are
free again.
To set automatic internal Ringback
Your Ultimate 106 can be set to call you
back when an engaged extension or
external line you have dialled becomes
free again.
Before replacing the handset:
RECALL
5
Replace the handset. When the extension
becomes available, your handset will ring
for 30 seconds. When you pick up the
handset, the voice announces:
"Ringback Extension X"
external line"
are calling rings. Automatic extension
Ringback does not apply to the
doorphone.
PLEASE NOTE
If you lift the handset while waiting for
Ringback, the internal Ringback request
is cancelled.
"Ringback
or
. Then the extension you

Advertisement

Table of Contents
loading

Table of Contents