Table of Contents
Advertisement
To set the ring delay for Answer
Machine/Call Director
Set Normal/Program switch to
.
PROGRAM
From extension 11 only.
6
Enter this code.
3#
Toll saver (answers after 6 rings if
there are no new messages in mailbox 1,
after 2 rings if there are new messages
in mailbox 1). Your Ultimate 106
"Answering delay is set"
announces:
Or
4#
2 rings. Your Ultimate 106 announces:
"Answering delay is two rings"
Or
5#
6 rings. Your Ultimate 106 announces:
"Answering delay is six rings"
Or
9 rings. Your Ultimate 106 announces:
6#
"Answering delay is nine rings"
To turn answering machine on, from
any extension
When in normal mode.
86#
Enter this code, your Ultimate 106
"Answering machine is on"
announces
To turn answering machine off, from
any extension
When in normal mode.
Enter this code, your Ultimate 106
87#
"Answering machine is off"
announces
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
.
.
.
.
.
.
To record an outgoing message
(OGM)
In normal mode.
36#
Enter this code, your Ultimate 106
"Please record your outgoing
announces
message after the tone"
Example of OGM
"Hello. I'm sorry we can't take your
call at the moment, but if you leave
a message we'll call you back. Please
speak after the tone".
To stop recording. The Ultimate 106
#
replays your OGM, and then announces:
"Press square to confirm"
#
To save your OGM or hang-up to abort
without saving the message.
To replay your outgoing message
In normal mode.
36#
Enter this code, your Ultimate 106
"Please record your outgoing
announces
message after the tone"
Press while the voice is announcing this
message, and your outgoing message
will be replayed.
.
.
.
19
Advertisement
Table of Contents
