Cobranet And Control Module; Connectors, Indicators And Controls - Crown CTS4200 Operation Manual

CTs Multi-Channel Power Amplifi ers
2 Setup
(continued)
Operation Manual

2.6 CobraNet and Control Module:

Connectors, Indicators and
Con trols
A. AUX Connector
AUX input, AUX output, and Foldback. See
Sections 3.2.7, 3.2.8, and 4.1.
B. Preset Indicator
Signals the number of the current preset, if
active, by fl ashing a series of fl ashes equal
to the current preset number. See Section
3.2.2.
C. Reset/Preset Switch
Activated by inserting a small item, such as
a paper clip, this switch is used to change
presets, restore settings to factory default or
restore all the presets to the factory defaults.
During operations of the switch, the Data
indicator fl ashes as an aid to the user. See
Section 3.2.9.
A D
B C
Figure 2.5 USP/CN Controls, Indicators and Connectors
(Note: Actual Product Artwork May Vary Slightly)
D. Data Indicator
Flashes when the amplifi er receives a valid
command that is addressed to the amplifi er.
See Section 3.2.1.
E. CobraNet Network Connectors
The dual RJ45 CobraNet connectors allow a
Primary & Secondary connection to the 100
Mbps Ethernet network. Should the Primary
connection lose link activity with the
net work, the module will automatically
switch to the Secondary connection to
ensure uninterrupted audio and control. The
indicators on the RJ45 connectors display
network information concerning the Ethernet
and CobraNet connections. See Sections
3.2.3, 3.2.4, and 3.2.5.
E
page 9