Solving Problems - Pace TDC575D Operator's Manual

SOLVING PROBLEMS

If the installed system does not seem to be working properly, first make sure that all the cables are
securely connected, then carry out the following checks, in the order shown:
Check
Is anything lighted on
your set-top's front
panel?
YES
D
Does the remote control
operate your set-top?
YES
D
Please see the next page.
0
Suggested solution
Power may not be reaching your set-top.
Make sure that the power cord is properly
R
NO
plugged in. If there is a switch by the wall AC
power outlet, switch it to ON.
Your set-top may not be turned on.
R
Check if the POWER LED on the front
NO
panel is blue. If it is red, press the POWER
button on the remote control to turn on
your set-top.
Further checks, if there is still a problem
Check that the wall AC power outlet is working (for
example by plugging in a lamp).
Check that nothing is blocking the path from your remote
control to the front panel.
Check that your remote control is currently set to
operate your set-top (consult the instructions supplied
with your remote control).
If your remote control will still not operate your set-top,
replace the batteries in your remote control.