500-Sheet Drawer (2Tm)-Sensor (Tray 3 Feed-Out) Removal - Lexmark W850n Service Manual

2X 500-sheet drawer (2TM)—sensor (tray 3 feed-out) removal
1.
Open the 2TM/TTM left door assembly.
2.
Remove the two screws securing the upper bracket (A).
3.
Disconnect the connector from the sensor (tray 3 feed-out) (B).
4.
Release the hooks securing the sensor (tray 3 feed-out) (B) to the upper bracket (A).
5.
Remove the sensor (tray 3 feed-out) (B).
B
Left
Connector
A
Bottom view
Hooks
4024-110
B
4-37
Repair information