Lexmark W850n Service Manual page 445

Assembly 6: 2X 500-sheet drawer (2TM)—drive and electrical
Asm- Part Units/
Index number option
6—1 40X0701
2 40X0699
Warning: When replacing the 2TM/TTM drive motor, the serial number must be verified inside the option drawer.
3 40X0700
3 40X3664
4 40X2735
Warning: When replacing the 2TM main cable, the serial number must be verified inside the option drawer.
5 40X0702
5 40X3665
Units/
Description
FRU
1 6 2TM drive gear kit includes:
• 2TM drive gear 22T/40T
• 2TM drive gear 126T
• 2TM drive gear 60T
• 2TM drive gear 37T (2)
• 2TM drive gear 32T
1 6 2TM/TTM clutch kit includes:
• 2TM/TTM clutch assembly
• Shaft
• Bushing 8 mm
• Clutch gear 38T
• Bushing 8 mm
• Washer
1 1 2TM/TTM drive motor
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are "20", then order this FRU.
1 1 2TM/TTM drive motor
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are "87", then order this FRU.
1 1 2TM/TTM controller card assembly
1 1 2TM main cable assembly
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are "20", then order this FRU.
1 1 2TM main cable assembly
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are "87", then order this FRU.
4024-110
7-13
Parts catalog