Audio Only; Dnr (Digital Noise Reduction); Input Select; Dnr - Sharp LC-42BX5X Operation Manual

Useful adjustment settings

Audio Only

When listening to music from a music programme, you
can set the display off and enjoy audio only.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Audio Only", and then
3
press ENTER.
Press a / b to select "On", and then press
4
ENTER.
Selected item
On Audio is output without screen image.
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".

DNR (Digital Noise Reduction)

Produces a clearer video image.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "DNR", and then press
3
ENTER.
Press a / b to select the desired level, and
4
then press ENTER.
Off
High
Low
Description

Input Select

Selecting input source
Can use for selecting the input source.
Press TV/VIDEO on the remote control unit or
1
TV/VIDEO on the TV.
Press TV/VIDEO on the remote control unit
2
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a / b .
Selecting input signal type
For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select an input source among
4
"Input1", "Input2" and "Input3", and then press
ENTER.
Press a / b to select the desired level, and
5
then press ENTER.
Input source
Input 1
Input 2
Input 3
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "Auto", the input terminal
where cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
Input 1/Input 2: Component s Video
Input 3: S-Video s Video
Selectable item
Auto, Component, Video
Auto, Component, Video
Auto, S-Video, Video
33