Wide Mode; Audio Only - Sharp LC-20SH3X Operation Manual

Useful Features (Continued)

WIDE MODE

You can select the picture display size for the playback
image of the DVD player from the following four modes:
"4:3", "16:9", "ZOOM" and "STRETCH".
1
Press MENU to display the Menu screen.
2
Press \/| to select "FEATURES".
3
Press '/" to select "WIDE MODE", and press OK.
4
Press '/" to select the desired setting, and press OK.
4 : 3
1 6 : 9
Z O O M
S T R E T C H
5
Press MENU to exit.
Selected item
4:3 Displays the image in a 4:3 size.
16:9 Stretches the image horizontally to display it in a
16:9 size.
ZOOM Displays the centre part of the image by enlarging
it in the horizontal and vertical directions.
STRETCH Stretches the image horizontally.
Image type
(For an image
stretched vertically)
(For an image
stretched vertically
with bands at the left
and right sides)
(For a 4:3 image)
NOTE
• The 4:3 image will be distorted on the screen when the "WIDE MODE"
is set to "16:9".
18
Description
4:3 16:9 ZOOM

AUDIO ONLY

When listening to music from a music programme, you can
turn the display off and enjoy audio only.
1
Press MENU to display the Menu screen.
2
Press \/| to select "FEATURES".
3
Press '/" to select "AUDIO ONLY", and press OK.
4
Press '/" to select "DISPLAY OFF", and press OK.
D I S P L A Y
D I S P L A Y
Selected item
DISPLAY ON
DISPLAY OFF
STRETCH
O N
O F F
Description
Both screen images and audio are output.
Audio is output without screen image.