Audio Only; Dnr (Digital Noise Reduction); Hdmi Setup - Sharp LC-32BD6X Operation Manual

Useful adjustment settings

Audio Only

When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Audio Only", and then
press ENTER.
4
Press c/d to select "On", and then press
ENTER.
Selected item
On Audio is output without screen image.
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".

DNR (Digital Noise Reduction)

Produces a clearer video image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "DNR", and then press
ENTER.
4
Press a/b to select the desired level, and
then press ENTER.
40
Description
Off
High
Low

HDMI Setup

HDMI (High-Definition Multimedia Interface) terminal
selection.
1
To watch an HDMI equipment image, select
"INPUT4" using TV/VIDEO on the remote
control unit or on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "HDMI Setup", and then
press ENTER.
• The HDMI Setup can be selected only when
"INPUT4" is selected.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR
HDMI Setup
5
Press a/b to select the desired item, and
then press ENTER.
HDMI Setup
Selectable items
items
Signal RGB/YCbCr 4:4:4/
Type YCbCr 4:2:2
Enable/Disable
Auto View
Audio Digital/Analogue
Select
6
Press a/b/c/d to select the desired
setting, and then press ENTER.
NOTE
• Refer to your external equipment operation manual for
the signal type.
• Item under "Signal Type" can be selected when the
equipment is connected with a DVI-HDMI conversion
cable.
• When the equipment is connected with an HDMI cable,
items are automatically set and cannot be selected.
[Off]
Description
Select the video signal
type from the HDMI
terminal.
Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.
Select "Digital" for audio
signal via the HDMI
terminal. Select "Analogue"
for audio signal via the
AUDIO jack.