Polycom SoundPoint 550 Reference Manual page 5

OR, you may

1) Lift handset. Press 97.
2) Enter the extension of the phone that is ringing and then
#
press the key. The call will be redirected to your
extension and you will be connected to the call.
Speed Dial 8 (1-digit codes)
Set up and update 1-digit speed dial codes for frequently
dialed numbers; directory is active on both your phone and
Personal Assistant Toolbar for fast, easy dialing.
To set up/update Speed Dial 8 (1-digit codes)
From your phone

1) Dial 74 and listen for tone.
2) Enter the 1-digit code plus the 10-digit phone number you
would like assigned followed by #. (Recorded message
confirms code was programmed.)
From your Personal Assistant Toolbar
1) Click Portal Auto-Login button on toolbar.
2) Select Outgoing Calls, then Speed Dial 8.
3) Enter the 10-digit phone number next to the code you
would like assigned. (Optional – add description.)
4) Click Apply.
To place call using Speed Dial 8
From your phone
1) Press the 1-digit speed dial code, then press Dial or Send.
From Personal Assistant Toolbar
1) Click on Speed Dial Directory icon.
2) Click on the number you wish to dial.
Speed Dial 100 (2-digit codes)
Set up and update 2-digit speed dial codes for frequently
dialed numbers; active on both your phone and Personal
Assistant Toolbar for fast, easy dialing.
To set up/update Speed Dial 100 (2-digit codes)
From your phone

1) Dial 75, press # and listen for tone.
2) Enter the 2-digit code plus the 10-digit phone number you
would like assigned followed by #. (Recorded message
confirms code was programmed.)
From Personal Assistant Toolbar
1) Click Portal Auto-Login button on toolbar.
2) Select Outgoing Calls, then Speed Dial 100.
3) Click Add, then select 2-digit code from pull-down list.
4) Enter Description (optional) and 10-digit phone number
you would like assigned.
5) Click OK.
To place call using Speed Dial 100
From phone
1) Press # plus the 2-digit speed dial code, then press Dial.
R44-550 v1.0
Quick Dial Guide
Quick Dial Guide
Call Forward
All Calls
All Calls to Voicemail
When Busy
Busy to Voicemail
When No Answer
to Voicemail
Not Reachable
(for business continuity plan
– requires set up)
Check Not Reachable Status
Call Waiting
Cancel for single call
Call Return
(last inbound number)
Directed Call Pickup
(intercept)
Redial
(last outbound number)
Access Voicemail
Transfer Call
Call Hold
Do Not Disturb
Three-way Call
N-way Call (more than 3)
Speakerphone
Mute
Music On Hold Deactivation
(per-call deactivation)
Clear Message Waiting Indicator
Change Number of Rings before
voicemail picks up
TelNet OfficeEdge Complete Reference
On Off
Forward or Forward or
72 73
21
#21
90 91
40
#40
41
#41
94 95
63
43
#43
70
69
97
66
or
Redial
86
or MESSAGE
Transfer
Resume
Hold
DND or DND or
78 79
(repeat to
Confrnc add)
(repeat to
Confrnc add)
(again for
Speaker off)
(again for
Mute off)
60
99
610
| 5 |