Setup Menu - Crestron Isys TPS-3100L Operation Manual

6.4" Lectern/Wall Mounted Touchpanel

SETUP MENU

INTERFACE MENU
AUDIO MENU
10 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L
NOTE: The touchpanel's calibration routine can also be accessed through the
Viewport Utility if the touchpanel is connected to a control system via Cresnet or to
a PC via RS-232 by selecting Functions | Put Touch Panel into Calibration
Mode... from the Viewport menu.
Setup Menu
To obtain the SETUP MENU, shown to the left, press the Setup button from the
MAIN MENU. The SETUP MENU offers a series of buttons, which opens
additional menus and displays, which are detailed in subsequent paragraphs. After
setup parameters have been set, select the Return button to return to the MAIN
MENU.
NOTE: For convenience, the current CRESNET ID setting is displayed in the lower
left corner.
NOTE: All touchpanel settings are automatically saved in non-volatile memory.
Interface Menu
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters select the Interface button located on the SETUP MENU and display the
INTERFACE MENU, shown to the left.
The Cresnet network identity number (CRESNET ID) is displayed on the
INTERFACE MENU. CRESNET ID is a two-digit hexadecimal number. The
hexadecimal number can range from 03 to FE and must correspond to the Net ID set
in the SIMPL Windows program of the Cresnet system. Matching IDs between the
touchpanel and SIMPL Windows program is required if data is to be successfully
transferred. The Net ID for the TPS-3100L is factory set to 03. No two devices in the
same system can have the same Net ID.
Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and
decrease the CRESNET ID by one, respectively.
Select the Return button located on the INTERFACE MENU to accept the changes
and return to the SETUP MENU.
Audio Menu
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
access the AUDIO MENU, shown to the left, press the Audio button from the
SETUP MENU. The AUDIO MENU offers a series of buttons, which opens
additional screens and is detailed in a table after this paragraph. Two of the buttons
on the AUDIO MENU perform a function directly. The Restore Default Settings
button returns all audio parameters to their default settings when the button is
selected. After audio parameters have been set, select the Return button to return to
the SETUP MENU.
®
Crestron Isys TPS-3100L
Operations Guide – DOC. 6291