Table of Contents
Advertisement
Wrong handling of the scanner could result in a heat, smoke, or scanner failure. Be sure to observe the following.
Never disassemble or modify the scanner.
Doing so could result in a fire or electrical shock.
Never
disassemble
Do not put the scanner on an unstable or inclined plane.
The scanner may drop, creating injuries.
Never put the scanner in places where there are excessively high temperatures, such as inside closed-up
automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
Avoid using the scanner in extremely humid areas, or where there are drastic temperature changes.
Moisture will get into the scanner, resulting in malfunction, fire or electrical shock.
Do not place the scanner anyplace where it may be subjected to oily smoke or steam, e.g., near a
cooking range or humidifier.
Doing so could result in a fire or electrical shock.
Never cover or wrap up the scanner in a cloth or blanket.
Doing so could cause the unit to heat up inside, deforming its housing, resulting in a fire.
Always use the scanner in a well-ventilated area.
Do not bring the AC adapter's power cable close to a heating device.
Doing so could cause the cable coating to melt, resulting in an electrical shock or fire.
Do not scratch or modify the scanner or its interface cable. Do not bend, twist, pull, or heat the cable.
Doing so could damage the scanner or its interface cable, resulting in a fire.
Do not put heavy material on the scanner or its interface cable, or allow it to get pressed under heavy
material.
Do not look into the light source from the scanning window or do not point the scanning window at
other people's eyes.
Eyesight may be damaged by direct exposure to this light.
Do not use the scanner if your hands are wet or damp.
Doing so could result in an electrical shock.
Never use chemicals or organic solvents such as benzene and thinner to clean the housing. Do not apply
insecticide to the scanner.
Doing so could result in a marred or cracked housing, electrical shock or fire.
Do not use the scanner with anti-slip gloves containing plasticizer.
The scanner housing may be broken, creating injuries, electrical shock, or fire.
v
Advertisement
Table of Contents
