Qk31-U (Usb Keyboard Interface) - Denso QK31-R User Manual

2d code scanner
Table of Contents

Advertisement

9.3

QK31-U (USB Keyboard Interface)

The USB keyboard interface requires no dedicated device driver. Data read by the scanner can be entered to the cursor
position in your application.
The USB keyboard interface operates in conformity with the following:
- Universal Serial Bus (USB) Device Class Definition for Human Interface Devices (HID) Version 1.11
- Universal Serial Bus (USB) HID Usage Tables Version 1.11 keyboard
(1) CAPS Lock state
Select the CAPS Lock ON or OFF to match the state of the connected keyboard. (Default: CAPS Lock OFF)
(2) Keyboard type
Select the type of the connected keyboard. (Default: Type 106,Japanese)
(3) Numeric data transmission format
Select the "inboard keys" or "TEN keys" on the connected keyboard. (Default: Inboard keys)
(4) Binary conversion
Select the conversion type to be applied to data read, from the following:
- "No conversion" (ASCII) (default) : Outputs 00h to 7Fh data in ASCII format bytewise. Selecting this parameter
- "Binary conversion"
- "Kanji conversion"
Note that some applications may fail to output converted data as it is displayed.
(Example) If the code data is "Kanji":
DATA:Kanji
Shift JIS:8ABF, 8E9A
Binary Data Conversion
None
Binary conversion
Kanji conversion
Note: Some applications cannot output data correctly on the display.
(5) Data transmission interval
Select the data transmission interval to be applied when the scanner sends data read to the host computer. There are
seven choices from 3 ms to 100 ms (default: 10 ms).
does not output 80h to FFh data.
: Converts 00h to FFh data to binary format and outputs it bytewise.
: Converts 00h to FFh data to Shift-JIS format and outputs it, two bytes at a
time. If there is any data to which this Kanji conversion cannot apply, it
converts such data to binary format and outputs it bytewise instead.
Output Data
Not output
8Ah BFh 8Eh 9Ah assigned characters
"Kanji"
Only indicates that scanning is complete.
Outputs 1 byte at a time in binary data.
Converted to Kanji and output.
33
Remarks
(Note 1)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qk31-u

Table of Contents