Denso QK31-R User Manual page 76

Code 128, GS1-128
Items
Reading Code 128
Reading GS1-128
Minimum number of readable digits for
Code 128
Maximum number of readable digits for
Code 128
Transmission of FNC1 for
Code 128
Minimum number of readable digits for
GS1-128
Maximum number of readable digits for
GS1-128
Transmission of FNC1 for GS1-128
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and GS1-128 (EAN-128) at
the same time.
Code 93
Items
Reading Code 93
Minimum number of readable digits for
Code 93
Maximum number of readable digits for
Code 93
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
: Can be changed only with the configuration software.
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
2-digit check digits)
: Can be changed only with the configuration software.
65
Defaults Refer to:

(See Note 2.)

1 digit
(See Note 1.)
99 digits

1 digit
(See Note 1.)
99 digits

Defaults Refer to:

1 digit
(See Note 1.)
99 digits