Denso QK31-R User Manual page 36

7.1.3 Data blocksorting mode
The scanner concatenated or structured append code data read into a maximum of 5 blocks at the specified separate
positions, sorts those blocks in the specified order, and outputs it in the data transmission format selected in the
scanner (see Chapter 9, Section 9.4).
Note: The separate position must be specified by the number of digits from the head of code data read. Specifying the
number of digits exceeding that in the code data results in an error.
 Blocksorting conditions
Blocksorting conditions
"Code type"
Example Code read: Code 128, Data: 1234567890,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,
Transmission of the number of digits: 4 digits, Prefix/Suffix: None, BCC: Disable
Separate position
3rd position, 8th position
3rd position, 8th position
Choices
Any code
QR Code
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128
Codabar (NW-7)
Code 39
Code 93
Interleaved 2of5 (ITF)
Standard 2of5 (STF)
GS1 DataBar
GS1 Composite symbols
Order of blocks
Block 2, 1, 3
Block 1, 3
25
Output data
[STX]K00104567812390[ETX]
[STX]K000512390[ETX]