Ricoh SP 200SF User Manual page 168

10. Troubleshooting
Message
Cannot Print
Memory Overflow
Size Mismatch:
Tray1
Press Start or Stop
Size
Mismatch:Bypass
Press Start or Stop
Type Mismatch:
Tray1
Press Start or Stop
Scan Disconnected
Cannot Connect
#### Server
Cannot Obtain IP
#### Server
166
Causes
The data is too large or
complex to print.
The specified paper size of the
file does not match that of the
paper loaded in Tray 1.
The specified paper size of the
file does not match that of the
paper loaded in the bypass
tray.
The specified paper type of the
file does not match that of the
paper loaded in Tray 1.
The USB cable or Ethernet cable
was disconnected while
scanning from a computer.
The connection with the FTP,
SMTP, POP3, SMB, or DNS
server was lost while sending or
receiving data.
The machine cannot obtain an
IP address from the FTP, SMTP,
POP3 server.
Solutions
Select [600 x 600dpi] in [Resolution:] to
reduce the size of data. For details, see the
Printer Driver Help.
Press the [ ] key to begin printing, or
press the [ ] key to cancel the
job.
Press the [ ] key to begin printing, or
press the [ ] key to cancel the
job.
Press the [ ] key to begin printing, or
press the [ ] key to cancel the
job.
Reconnect the USB cable or Ethernet cable
properly, and then try the operation again.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/POP3
server, check the [Server Properties...]
setting in Smart Organizing Monitor.
If the problem involves the DNS server,
check its configuration using Web Image
Monitor.
If the problem involves the FTP server,
check the [Edit Network Scan Destination]
setting in Smart Organizing Monitor.
If the problem involves the SMTP/POP3
server, check the [Server Properties...]
setting in Smart Organizing Monitor.