Ricoh SP 200SF User Manual page 134

8. Configuring the Machine Using Utilities
Configuring the SNMP Settings
Click [SNMP] to display the page for configuring the SNMP settings.
SNMP
Item
SNMP
SNMPv1,v2 Setting
Item
SNMPv1 Trap
Communication
SNMPv2 Trap
Communication
Community
Item
Community Name
132
Select whether SNMP is active or inactive for the interface board(s).
Select whether to send SNMPv1 trap.
Select whether to send SNMPv2 trap.
Enter the name of the community to which the network interface board belongs,
using up to 15 characters. If the community name is different from that of the
hosts, requests from the hosts will not be accepted.
Description
Description
Description