Setup; Setup Operation - Alpine iLX-507 Owner's Manual

Setup

Setup Operation

To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the
ACC or ON position. To do this, follow the procedures
below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Release the parking brake. (For safety, release the
parking brake while depressing the foot brake
pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the
transmission lever in the Park position.
Now, the locking system for the Setup operation has
been released. Engaging the parking brake can
reactivate the Setup Menu, as long as the car's ignition
has not been turned off. It is not necessary to repeat the
above procedure (1 through 3).
Each time the ignition is turned OFF, perform the above
procedure.
1
Press the (HOME) button.
The HOME screen is displayed.
2
Touch [Setup].
The Settings menu screen is displayed.
16
-EN
3
Touch the required setting category on the
upper part of the Settings menu screen, and
then touch the setting item.
Setting categories:
Device: See "Device Setup" (page 17)
Function: See "Function Setup" (page 21)
System: See "System Setup" (page 31)
[Setup] button