First Connection As Remote Working - Alcatel-Lucent ALE-30h User Manual

User Manual

First connection as remote working

When you connect your desk phone for the first time remotely, you are prompted to set a PIN code.
The PIN code is requested when you enter in the VPN configuration (submenus) or when you boot your
desk phone (depending on the VPN configuration). The PIN code is retained during the session so that you
can access the VPN configuration without having to re-enter your PIN code until you exit the VPN
configuration. Before configuring your phone for remote working, check if you have all the information from
your administrator.
If your set is not equipped with a magnetic keyboard, use the alpha-numeric keyboard to enter letters.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard. When in
alphabetic mode, the LED corresponding to the key remains lit up.
To configure your desk phone:
•
Use one of the following:
o Open the user local menu: reach the 'Menu' page
Config.MMI
o Connect your desk phone to the network (and plug in the power jack if you are using an
external power adapter). When the desk phone displays the 'Step 2' during the boot,
repeatedly press the '*' and '#' keys in succession until a menu is displayed.
•
VPN (scroll down the menu).
o
VPN Config
▪
Enter the new PIN Code.
▪
▪
Enable
working.
▪
VPN
▪
VPN
server. The PSK can be unique for all remote workers on a same installation or can
be specific to each remote worker. In the first case, the VPN authentication has to be
enabled.
▪
IKE version:
Other advanced settings if requested:
force encapsulation,
o
VPN Tftp Use TFTP servers, tftp1,
option and enter the addresses and port of the TFTP servers.
o
VPN Authent Use
VPN server (username and password) is required. The VPN authentication can be disabled
in case a specific PSK is used for each remote worker.
o
VPN Pincod Request Pincode on
when you boot your desk phone. We recommend you activate this option.
o
Select this icon to return to the main menu.
o
Select this icon to save parameters.
•
The VPN configuration is saved and the main menu is displayed.
•
Select this icon to exit the configuration menu. The desk phone restarts.
•
Enter the PIN code if you have selected the option
•
Validate.
•
Your desk phone is ready for remote working.
8AL91433ENAAed01
Validate.
VPN: you have to activate this option to use your desk phone for remote
Server: enter the address of the VPN server.
PSK: enter the pre-shared key to establish a secure connection with the VPN
Enter the IKV version (IKEv1/IKEv2).
Static Virtual IP (VIP
Authentification, User, Password: activate this option if a logon to the
Settings Phone Local Menu
IKEv1 aggressive mode
Addr).
tftp2,port: if the TFTP servers are required, activate this
Boot: if this option is activated, the PIN code is required
(Request Pincode on
(when IKEv1 enabled),
Boot).
41 /70
IKE