Advertisement
16-09-03
2.9)
Before using the eTrex, set-up the
working units as shown on the picture. To
do so refer to page 20 of the ' GPS Field
Guide' .
If the lighting conditions make it hard for
you to see the screen you can refer to page
16 of the ' GPS Field Guide' .
2.11)
Now make sure that the coordinates displayed are within the range of the ' Country
Information' form (that you received with the whole set of GPS training documents). If
this is not the case, please refer to chapter 4, section 4.7 of the ' GPS Field Guide' .
GPS_test_and_use.doc
2.10)
Press and hold the ENTER button in
order to directly access the ' MARK
WAYPOINT' page
coordinates are displayed.
Verify that the units displayed are the
same as on the figure.
10:28
on which the
6
Advertisement
