Garmin
Start Up
Press and hold "Power" button on
right hand side of GPS
Wait for GPS to track satellites
To find current location be in a
clear area (Note: *location and
satellites will be difficult to find if
indoors*)
Press " page" to switch between
map, pointer, trip computer, and
menu screens
*you do not need to wait for the GPS
to track satellites to access these
functions*
Mark a Way Point
A waypoint marks a single specific
location. (e.g. school, trail junction,
sampling location). We mark waypoints
so that we can map that specific
location visit it again or view its
geographic coordinates.
Press "page" until you reach the
menu screen (Figure 1)
"Mark" will be highlighted; press
"enter"
Figure 1
GPS will ask if current location is
"ok to mark", if yes, press "enter"
The screen will then go back to
the "menu" screen
How to Rename a Waypoint
If you want to return to a specific
location you have marked, you can look
up the waypoint and the GPS will show
you how to get there from your current
location.
Press "page" until you reach the
menu screen
1
Press down arrow key once so
that "waypoints" is highlighted
(Figure 2)
Figure 2
Press "enter"
Use arrow keys to scroll to which
way point you would like to look
at; press "enter"
"Go to" will be highlighted; press
"enter" to view waypoint, you
will be taken to a screen that will
guide you to your waypoint
(Figure 3)