Siemens optiPoint 410 S Information And Important Operating Procedures page 29

Marks
The device conforms to the EU guideline 1999/5/EG, as attested by
the CE mark.
This device has been manufactured in accordance under a certified
environmental management system (ISO 14001). This process en-
sures that energy consumption and the use of primary raw materi-
als are kept to a minimum, thus reducing waste production.
All electrical and electronic products should be disposed of sepa-
rately from the municipal waste stream via designated collection fa-
cilities appointed by the government or the local authorities.
The correct disposal and separate collection of your old appliance
will help prevent potential negative consequences for the environ-
ment and human health. It is a precondition for reuse and recycling
of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service, the shop
where you purchased the product or your sales representative.
The statements quoted above are only fully valid for equipment
which is installed and sold in the countries of the European Union
and is covered by the directive 2002/96/EC. Countries outside the
European Union may have other regulations regarding the disposal
of electrical and electronic equipment.
Product Identification
The identification details of your telephone (i.e. the exact product designation
and the serial number) are shown on the nameplate on the rear of the base unit.
Please have this information ready whenever you call our service department be-
cause of trouble with or defects on the unit itself.
Telephone Information
29