Step 5: Connect Creative Digital Audio Player Ii Mg To Pc - Creative NOMAD II MG 64MB User Manual

Step 5: Connect Creative Digital Audio Player II MG to PC

You may leave your computer on when you connect your
Creative D.A.P player II MG to the PC since USB is
Plug-and-Play.
The LCD indicates that
Creative D.A.P II MG is
in communications
mode.
Turn on the power to
the adapter.
Plug the adapter into the adapter connector behind the
Creative D.A.P II MG docking station.
Be sure that the batteries are in the
player. Creative D.A.P II MG is not
USB-powered.
Plug the flat end of the USB
cable into the USB
connector of the PC.
Plug the square end of the USB cable into the USB connector behind
the Creative D.A.P II MG docking station.
Figure 2-3: Connecting the Creative Digital Audio player II MG to a PC.
Position the computer
so that its USB ports
can be easily accessed.
Setting Up Your Creative Digital Audio Player II MG 2-3
Note: In
some PCs,
the USB
port(s) are
found on the
front of the
computer,
not the back.