4.System Maintenance
4. System Maintenance
General Notes and Cautions
You may use one of the following when you have problems with the system software or the HDD.
Clear Server:
Deletes all queued print jobs from the E-25C.
Restore Default Fiery Settings (Configure) /Factory Defaults (Operation Panel):
Returns customized configuration settings to the default settings. System patches and items created
and registered via Command WorkStation will remain.
Restore Factory Default Image:
Restores the E-25C factory default image using the image stored in the E-25C internal HDD or external
USB flash drive. All Setup configurations as well as all custom files, jobs, logs, and templates stored on
the E-25C HDDs are deleted. Factory default image can also be backed up on a USB flash drive [Link
to Backup/Restore]. It is recommended to store the factory backup image on an external device such as
a USB device.
System Software Reinstallation/Upgrade:
Reinstalls the E-25C system software either from a USB flash drive or a Windows Computer over
network. All Setup configurations as well as all custom files, jobs, logs, and templates stored on the E-
25C HDDs are deleted.
Backup/Restore:
Backs up the customized E-25C system image to the internal HDD or an external USB flash drive and
restores them as necessary. [Link to Backup/Restore]
The following table shows whether the data on the E-25C will remain or be deleted when each of these
features are used.
Clear Server
Operation
Command
WorkStation
Instruction
[Link to
82
Restore Default
Fiery Setting
(Configure)
Configure
Configuration and
Factory
Restore
Defaults
Factory
(Operation
Default
Panel)
Image
Operation
Service
Panel
Switch
Operation Or
WebTools
[Link to
[Link to
System
Software
Reinstallation /
Upgrade
Network
Installation
USB
Installation
[Link to