CONCORD Eye-Q Duo 2000 Quick Start Manual page 6

TAKING VIDEO CLIPS
MAIN MENU
Mode
M
Size
Quality
Flash
1. When Video Clip is highlighted in the MODE menu press
2. Press the Shutter button to begin recording a continuous video clip.
3. Press the Shutter button again to stop recording.
4. The camera will continue recording until the memory is full.
OR
5. When the recording is completed, the camera will return to Camera Mode.
Note: If you would like to cancel your video clip session before pressing the
Shutter button, press MENU to exit.
USING THE MMC/SD
In addition to internal memory, the camera features an external memory port that
uses a removable MMC/SD that allows you to store additional images. When the
MMC/SD is inserted, the camera uses it as its default memory. The stored images and
video clips in the internal memory will be transferred automatically to the MMC/SD,
and all photos taken from that point will be stored on it. The images will remain
stored on the MMC/SD until deleted.
Inserting the MMC/SD:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of
the camera.
3. Lift the battery door to open.
4. Insert the MMC/SD in the direction specified on the card.
(fig.1.6)
5. Close the battery door.
NOTE: If a MMC/SD with insufficient memory is inserted, there will only be a
partial transfer and the MMC/SD will be filled. Please insert an MMC/SD with
sufficient memory.
MODE
Video Clip
Self-timer
Main Menu
4
SHUTTER TO •REC
MENU TO CANCEL
.
fig.1.6
•REC
SHUTTER TO STOP