Product Overview; Specifications; Attachments/Accessories; Operation - Toro Reelmaster 3100-D Series Operator's Manual

Product Overview

Specifications

Net weight

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
56 kg (124 lb)
for a list of all
9

Operation

Training Period

Before operating the verticutter reels, evaluate the
performance of the reel at the desired setting. Operate
in a clear, unused area to determine if the desired
results are achieved. Adjust as desired.

Operating Tips

1. Operate the traction unit at full throttle, full reel
speed (setting 11) and between 5 to 8 km/h (3
to 5 mph).
2. The maximum recommended setting is 6 mm
(1/4 inch) deep blade penetration.
3. The power requirements to operate the
verticutter reels vary with turf and soil conditions.
Travel speed may need to be reduced in some
conditions.
4. When operating in turf conditions where much
debris is encountered, or unusually heavy
thatch, open the front and rear discharge shields
to help allow the debris to discharge from the
reel.
CAUTION
Thrown debris could cause personal
injury.
Do not open the rear shield so that it is
higher than level to the ground.