Notes On Handling - Panasonic WJ-VPU4000 Operating Instructions Manual

Notes on Handling

n Usage
• Do not set liquid containers or small
metal objects on the recorder or
SSDs.
• Do not insert foreign objects into the
openings of any devices.
• Do not attempt to modify the
recorder or SSDs.
• Do not use the recorder in a place
where it or an SSD might get wet, or
water might get inside them.
• The recorder is intended to work
only with SSDs. Do not attempt
to use non-SSDs, as that could
damage the recorder.
• When inserting an SSD, make
certain that it is not upside down or
backwards, and do not attempt to
force a bent or damaged SSD, as
that could damage the card or SSD
slot.
• While the recorder is recording
or settings are being changed,
do not disconnect the recorder's
power cable (included in the
separately sold Cable Kit). Before
disconnecting the power cable,
first stop all operations and turn
the recorder off. Otherwise, the
SSD may be damaged, or recorder
setting files or management data on
the SSD may be corrupted.
If the video and audio was recorded
while being played back, several
seconds of video and audio before
the moment the power cable was
disconnected will be lost.
Precautions for use of SSDs
• SSDs are formatted using the
Front-End Application. SSDs
formatted by any means other than
the Front-End Application cannot
be used with this recorder.
(Refer to the Operating Instructions
for Front-End Application)
n Maintenance
• To clean the recorder, turn the
vehicle's ignition switch to the
LOCK (OFF) position, and keep the
recorder power turned off (see "Off"
on page 30).
• Do not use solvents such as
benzene, thinner or alcohol, as
these can deform the case or
damage the surface finish.
• Use a soft, dry cloth to dust off the
recorder.
• If using a chemically treated cloth,
follow the instructions provided with
it.
19