Emerson Magtech LTM−350 Series Instruction And Operation Manual page 2

August 2020
NOTICE
Read this manual before working with the product. For personal and system safety, and for optimum
product performance, make sure that you thoroughly understand the contents before installing, using or
maintaining this product.
For Equipment service or support needs:
Customer Central: +1-800-221-3653 (8:00 a.m. to 5:00 p.m. CST US)
WARNING
Failure to follow safe installation and servicing guidelines could result in death or serious injury.
•
Make sure only qualified personnel perform the installation.
•
Use the equipment only as specified in this manual. Failure to do so may impair the protection
provided by the equipment.
•
Do not perform any services other than those contained in this manual unless you are qualified.
Explosions could result in death or serious injury.
•
Verify the operating environment of the Magtech LTM-350 series transmitter is consistent with the
appropriate hazardous locations certifications.
•
Do not remove the gauge cover in explosive atmospheres when the circuit is alive.
•
To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing.
High voltage that may be present on leads could cause electrical shock.
•
Make sure the main power to the Magtech LTM-350 series transmitter is off and the lines to any
other external power source are disconnected or not powered while wiring the instrument.
2
Reference Manual
L231040 Rev AD