Trim Rod (Tilt Pin); Tilt Lock Mechanism; Tilt Support Lever For Power Trim And Tilt Or Hydro Tilt Model - Yamaha F40H Owner's Manual

2. Bolt
3. Cap
A
1
2
1. Trim tab
2. Bolt
Bolt tightening torque:
18 N·m (1.8 kgf·m, 13 lb·ft)
(F40H, F50H, F60F)
37 N·m (3.7 kgf·m, 27 lb·ft)
(F40G, FT50J, FT60G, F70A)
EMU26263

Trim rod (tilt pin)

The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
EMU26313

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
B
ZMU03097
ZMU03593
ter when in reverse gear.
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the "
(lock) position. To release, push the tilt lock
lever in the " " (release) position.
EMU34462
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
Components
ZMU03594
ZMU03595
"
28