1
2
7
1. Power trim and tilt switch
2. Remote control lever
3. Neutral interlock trigger
4. Neutral throttle lever
5. Main switch
6. Engine shut-off switch
7. Throttle friction adjuster
EMU26191
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the le-
ver back from neutral engages reverse. The
engine will continue to run at idle until the le-
ver is moved about 35 (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
F
4
2
5
6
7
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
3
4
5
6
ZMU01723
N
1
R
4
3
6
5
7
ZMU01725
6. Throttle
7. Fully open
EMU26202
Neutral interlock trigger
To shift out of neutral, first pull the neutral in-
terlock trigger up.
1. Neutral interlock trigger
EMU26213
Neutral throttle lever
To open the throttle without shifting into ei-
ther forward or reverse, put the remote con-
trol lever in the neutral position and lift the
neutral throttle lever.
N
1. Fully open
2. Fully closed
TIP:
The neutral throttle lever will operate only
when the remote control lever is in neutral.
The remote control lever will operate only
Components
1
ZMU01727
1
2
ZMU01728
22