General Description; Serial Interfaces; Power Supply - Honeywell NOTIFIER AM-8000 Installation Manual

Intelligent addressable fire detection

Hide thumbs Also See for NOTIFIER AM-8000:

Programming manual (60 pages)

Table of Contents

control unit is a fire detection control unit manufactured in conformity with the EN.54.2 and EN.54.4 rules.

AM-8000

Technical features :



Multi-microprocessor system

LCD-8000-L / LCD-8000-F with display TFT 7" (800 x 480 with backlit ) and 256 colors and touch-screen with

keyboard simulation to program and configure the system.



Keys dedicated to specific functions : Evacuation, Reset delays, Buzzer Silencing, Silencing / Siren Reset,

System Reset.



LINES:

2 analogue lines programmable to closed or open loop for the connection of the field elements

Each line can drive 159 sensors + 159 input and output modules

max 4 loop each panel using the optional 2 loop LIB-8000 card.



SERIAL INTERFACES:

- 1 x RS.485 to drive remote LCD repeaters.

x Can-Bus lines to connect to closed loop ring for a network of up to 8 panels and 8 LCD-8000 terminals

- 2



POWER SUPPLY:

Standard 27,6Vdc - 4A total.

Battery charger 27,6 Vdc – 1,5A (

User output 28Vdc (+3% ÷ -17%) 1.5A,



OUTPUTS:

1 Supervised Siren Output

1 General Alarm Output with contacts free from voltage

1 General Fault Output with contacts free from voltage



Mechanics

The control unit mechanics is suitable for wall installations

Sizes

(L) x

403mm

Protection grade : IP 30

Operation temperature : -5 °C a +40 °C

Stockage temperature

Weight: 7.5 Kg



Main Functions

3 password levels (Operator - Maintenance – Configuration)

4 total access levels in conformity with the EN.54 rules

Programmable text : point description through 32 characters; zone description through 32 characters

500 physical zones and 400 logical groups

CBE Control Equations (Control-by event) for activation with logical operators (And,Or, Xor , etc.).

Event historical file with the last 2000 events in non-volatile memory

Real time clock

Line self-programming with automatic recognition of the type of the connected devices.

Automatic recognition of points having the same address.

Decision algorithms for the alarm and fault criteria.

Automatic sensitivity change Daytime /Night.

Signaling of need for sensor cleaning

Signaling of poor sensor sensitivity

Programmable alarm threshold for sensors

Pre-defined software function programming for the various devices used

Walk-Test function for zones.

AM-8000

AM8000_manu-inst