K48, Sensor Module Cabinet-Mounted Smc20; General Information - Siemens SINAMICS S120 Device Manual

Cabinet modules nema

Hide thumbs Also See for SINAMICS S120:

Table of Contents

8.10 K48, Sensor Module Cabinet-Mounted SMC20

K48, Sensor Module Cabinet-Mounted SMC20

Availability of option

This option is available for the following S120 Cabinet Modules:

● Booksize Cabinet Kits

● Motor Modules in chassis format

The SMC20 Sensor Module is used for simultaneous acquisition of speed and position. The

signals emitted by the incremental encoder are converted here and made available to the

closed-loop controller via the DRIVE-CLiQ interface for evaluation purposes.

The following encoders can be connected to the SMC20 Sensor Module:

● Incremental encoder sin/cos 1 V

● Absolute encoder EnDat

● SSI encoder with incremental signals sin/cos 1 V

The motor temperature can also be detected using KTY84-130 temperature sensors or PTC

thermistors.

The maximum encoder cable length is 330 ft (100 m).

Cabinet Modules NEMA

Manual, 04/2014, A5E03586450A