MCZ CUTE AIR 8 M1 Use And Installation Manual page 6

13-FIRST APP START-UP AND ASSOCIATION WITH MCZ STOVES
IMPORTANT!! Do not lose or remove the QR code from the stove. If the stove is reset and/or the smartphone and/or
handheld remote control are changed, you must have the QR code and passwords available to configure the system.
AUTOMATIC MODE
The QR code and the passwords are located at the back of the stove and in the warranty.
Scan the QR code using the camera of the device (accessory or smartphone) and acquire it.
When the code is acknowledged, the app will ask you to enter an identification number for the stove (for example "living room stove") to
easily identify the stove/s in the list of configured devices.
This will automatically configure the app to work with both home WI-FI and remote WI-FI technology.
6
EXAMPLE OF QR AND PASSWORD LABEL