MCZ CUTE AIR 8 M1 Use And Installation Manual page 35

24-SETTINGS MENU
Modifying the pellet recipe and air recipe
This function is for adapting the stove to the type of pellet in use. In fact, since there are many types of pellets on the market, operation
of the
stove varies significantly depending on the good or poor quality of the fuel.
The amount of pellets in the brazier can be increased or reduced:
• If the pellets tend to jam in the brazier due to an excess of fuel
• If the flame is increasingly higher even at low power values
• If the flame is always low
ATTENTION! When you access the pellet recipe menu, a POP-UP appears prompting a password. Enter "1234"-
To edit the PELLET recipe, select one of the values
available.
The available values are:
- 3 = Reduction of pellet loading by 20% at all power
values
- 2 = Reduction of pellet loading by 13% at all power
values
- 1 = Reduction of pellet loading by 6% at all power
values
0 = no change
1 = Increase of pellet loading by 3% at all power values
2 = Increase of pellet loading by 6% at all power values
3 = Increase of pellet loading by 10% at all power values
To edit the AIR recipe, select one of the values available.
The available values are:
-- 2 = - 10%
- 1 = - 5%
0 = (default value)
1 = + 5%
2 = + 10%
This function is used to adjust combustion air if the flame
is too high or too low.
ADAPTIVE MODE
This function is found in the "pellet recipe" menu.
By activating the function (select ON) the stove adapts
its operation in case of special installations or when
using poor quality pellets.
The following are some examples of when it is
recommended to activate the function:
• formation of combustion residue
• formation of condensate in the flue when operating
at minimum power
• improve cleaning of the glass when operating at
minimum power
Attention! It is preferable that this mode ("Pellet recipe"/ "Adaptive mode") be activated under the supervision of a
qualified technician.
Technical Dept. - All rights reserved - Reproduction prohibited 35